FIRMWARE V 1.00.6 (2020-11-18) - Option "Active FTP" (Active Mode) added. - Now also supports the previous ZRXP transmission format. - Now supports "MQTT & MQTTS" transmissions. - Diagnostic output for SMS transfers added. - Further minor bug fixes and firmware optimizations. V 1.00.5 (2020-08-10) - Revised/increased possibilities for customizing CSV files for IP data transmission and for downloading data on site. - SMS test transmission is now also possible without a configured SMS transmission. - Bugfixes: ● handling of UUID (Universally Unique Identifier) for ZRXP and MIS format corrected ● NTP timestamp improved (date of the device was set into future) ● improved "timing" between data logger and pressure probe (potential error "ERR05") ● further minor corrections V 1.00.4 (2020-02-13) - Now available: additional measurement channel (M6) for calculation of more values ("processed value") - Added: FTP-command managment. Special commands in a control file on an FTP server allow access to the OTT ecoLog 1000 - Stations and measuring channels can now be provided with a unique identifier (UUID). V 1.00.2 ... V 1.00.3 OTT internal versions; not published V 1.00.1 (2019-07-04) - Initial version --------------------------------------------------------------------------------- OPERATING SOFTWARE LinkComm V 3.7.4 (2020-11-18) - The resolution of the OTT ecoLog 1000 water temperature measurement is now optionally adjustable to two decimal places. - Option of a second test transmission for sending current data on request. - Now supports the previous ZRXP transmission format for OTT ecoLog 1000 transmissions. - New server type "MQTT & MQTTS" for OTT ecoLog 1000 transmissions added. - Option "Active FTP" (Active Mode) to the OTT ecoLog 1000 server settings added. - Includes OTT ecoLog 1000 Firmware V 1.00.6. - Other minor software optimizations and bug fixes. V 3.7.0 ... 3.7.3 - Updates to these versions only concern data collectors/transmitters from Sutron; not relevant for operating an OTT ecoLog 1000 or OTT internal versions; not published. V 3.6.9 (2020-08-10) - Added support for exchanging setup information with OTT Hydras 3 - Enables the creation of an additional measuring channel: measurement of relative humidity ("Logger humidity") in the communication unit of the OTT ecoLog 1000 - Revised/increased possibilities to configure CSV files for IP data transmission and for downloading data on site; e.g. date and time format, separators, ... - OTT ecoLog 1000 cell provider settings are now filterable by country and region - OTT ecoLog 1000 cell provider database has been updated - The OTT ecoLog 1000 system length can be changed (after shortening the pressure probe cable) via the tab "Diagnostics", button "System Length" - OTT ecoLog 1000 modem status information added to the "Communication" tab - The results of the last OTT ecoLog 1000 data transmission can be retrieved using another button on the "Communications" tab - While converting downloaded data to another format, the operating software displays a progress dialog - Data can now also be downloaded on site from the OTT ecoLog 1000 in "ZRXP V3" or "OTTML" format - Default configurations now also support imperial units (with corresponding default settings) - Downloaded log files are now archived (-> "Log files ..." button on the "Data" tab) - Includes the OTT ecoLog 1000 Firmware V 1.00.5 - Further minor software optimizations and bugfixes V 3.6.1 ... 3.6.8 - Updates to these versions only concern data collectors/transmitters from Sutron; not relevant for operating an OTT ecoLog 1000 or OTT internal versions; not published V 3.5.17 (2020-02-13) - Enables the creation of an additional measuring channel and the input of a unique identifier for stations and measuring channels; see Firmware v. 1.00.4 V 3.5.13 ... 3.5.16 - Updates to these versions only concern data collectors/transmitters from Sutron; not relevant for operating an OTT ecoLog 1000 V 3.5.12 (2019-08-13) - Initial version for OTT ecoLog 1000 (until V 3.5.11 -> versions only for data loggers/transmitters from Sutron)